GW20型全自动钢筋弯箍机主要技术参数
GW20 Full-automatic Steel Hoop Bending Machine Technical Parameter
目型号
GW20
GW20B
GW30A
GW30B
额定电压
380V
额定频率
50Hz
电机功率
1.5 Kw
2.2Kw
工作周期
20-25r/min
26r/min
弯曲钢筋直径
φ4-φ20mm
σb≤450Mpa
Ⅱ级螺纹钢φ6-14㎜
可弯曲钢筋范围φ6~φ28(Ⅱ级螺纹钢)圆钢φ6~φ30
(σb≤450Mpa)
工作角度
90° 135° 180°
整机重量
110±10Kg
210±10Kg
GW20型全自动钢筋弯箍机是一种工程用小型钢筋弯曲设备,本机具有弯曲工序简化,工作效率高BG视讯|首页-欢迎您,角度控制采用控制??锽G视讯|首页-欢迎您,弯曲准确,可将σb≤450Mpa的钢筋加工成所需的各种几何形状。
本机轻巧灵活,使用简便,性能稳定、双脚踏开关,自动弯曲安全性高??刂平嵌鹊拇衅鞑捎梅墙哟ナ?,无撞击、无磨损。使用寿命长,弯曲效率是弯曲机的4-5倍。它是小直径钢筋弯曲的理想设备BG视讯|首页-欢迎您,更是大型弯曲机的重要补充设备。
GW20 Full-automatic Steel Hoop Bending Machine is a small bar bending device for a project. This machine bending process is simple and working efficiency is high. The angle controlled by control module, bending accurately. It can bend the σb≤450Mpa reinforced bar into various shapes required.
This machine is flexble, easy to use, and has stable performance, double foot pedal switch, bending automatically in safety. The sensor of the control angle is non-contact, no impact, no wear. L ONG USING LIFE. The bending efficiency is 4-5 times as other bending machines. It is not only the ideal equipment for small diameter steel bar bending, but also important supplementary for large bending machine.